Eco-Acid Brick Cleaning in Craigieburn

The rapid housing expansion means many exteriors are still in need of first cleans after construction. We price eco-acid brick cleaning in Craigieburn before we book the clean.

Written fixed-price quotes · Quotes from your photos

What we do

  • Lower acid dilutions
  • Runoff capture systems
  • pH monitoring
  • Waste water neutralisation
  • Environmental certification

What we do not do

  • A price without seeing the surface
  • One method for every material
  • Work outside Melbourne we have not confirmed
Grey brick wall before and after cleaning, diagonal split
Real Spotless job: grey brick before and after

Common questions

Does lower-strength eco-acid actually clean brick as well as standard acid?

Yes, for fresh mortar smear. A 1:20 dilution with controlled dwell time and agitation lifts fresh mortar smear as effectively as standard 1:10 strength. The longer contact time and mechanical agitation do the work — acid strength is secondary. Older or hardened mortar may need slightly stronger dilution, but most post-build cleaning works well at eco-strength.

What happens to the runoff water?

All runoff is captured in secondary containment at the site. Once captured, it is neutralised with bicarbonate (raising pH to neutral), tested to confirm neutralisation, and then disposed of responsibly — either on-site through controlled infiltration or by a licensed waste water contractor. No acid enters stormwater or soil.

How do you monitor the pH of waste water?

We use pH testing strips or meters to confirm waste water is neutral (pH 6–8) before disposal. Testing results are documented and provided to you. This confirms the acid has been fully neutralised and the waste water is safe for the environment.

Does eco-acid cleaning cost more than standard cleaning?

Eco-acid cleaning involves extra steps: capture systems, neutralisation and waste water testing. Those steps are included in the written fixed price we quote for your job, so you see the full cost before we start.

Is eco-acid cleaning suitable for cream brick?

Yes, with a lower dilution and mandatory test panel. We would use 1:40 dilution (even lower than standard eco-acid) and inspect the test panel carefully for any iron reaction. If the brick shows sensitivity, we switch to soft-wash chemistry entirely.

What is the difference between eco-acid and soft-wash brick cleaning?

Eco-acid still uses hydrochloric acid but at lower strength with containment. Soft-wash uses no acid — just detergent and enzyme chemistry. Eco-acid is faster and better for fresh mortar smear. Soft-wash is safer for sensitive brick and causes zero acid environmental load, but takes longer and works better on organic growth than cement smear.

Can I use eco-acid cleaning on heritage brick?

Heritage brick in inner Melbourne often uses lime mortar that cannot tolerate acid, even at eco-strength. We recommend soft-wash detergent instead. If the heritage brick is lime mortar, acid of any strength is not recommended — soft-wash only.

Do you provide documentation of the environmental management?

Yes. We provide a report documenting the runoff capture method, neutralisation process, pH testing results before disposal and confirmation of responsible waste management. This is useful if you want to demonstrate environmental due diligence for your property.

Get a written fixed price

Residential, commercial or strata. Send your suburb, the job and a few photos, and we reply with a written fixed price.

Send Photos, Get A Fixed Price

+ Add email for a written copy

We'll be in touch shortly. Your details only go to our team.

Ready For A Spotless Finish?

Brick, concrete, pavers or render: send a few photos and get a written fixed-price quote from Melbourne specialists.