This Compliance article is written for Melbourne owners and managers who need more than a quick blast. Commercial Pressure Cleaning jobs in our city require a surface diagnosis before any cleaning starts.
In Melbourne, everything from growth corridor new-build mortar smear to inner-suburb heritage brick has its own cleaning risk profile. The right method, chemistry and pressure keep the surface safe and the result lasting.
Identify drains and low points
Mark all nearby stormwater pits and garden beds before the first scrub.
Set up containment barriers
Drain mats, sandbags and vacuum recovery are the standard controls for sensitive sites.
Check the weather
Avoid cleaning before heavy rain, which can overwhelm containment and send dirty water into drains.
On the job
- Know the site drainage before you start.
- Containment barriers protect stormwater and landscaping.
- Weather affects runoff management and scheduling.
More guides
The Runoff Containment Rule Most Melbourne Pressure Cleaners Ignore
EPA Victoria has clear rules about what cant flow into stormwater. Here is what compliant operators do differently.
Read guide →
EPA Water Containment Rules for Melbourne Pressure Cleaners
A practical summary of the EPA Vic guidance and what compliance looks like on a real job.
Read guide →
Working at Heights for Facade Cleaning — What Your Contractor Needs
Above 2m, working-at-heights regulations apply. Heres what compliance looks like.
Read guide →
